Ladder Type Cable Trays:Ladder type cable trays that are available in wide specifications. These ladder type cable trays are made of mild steel that is pre galvanized. They have two longitudinal side rails connected by rungs. Some of the specifications of ladder type cable trays are as follows:
Available in width ranging from 150mm to 1200 mm Height ranges from 50 mm to 150 mm.Thickness varies from 16 SWG to 10 SWG
It comes in hot dip galvanized, red oxide, enamel painted and power coated Finish.
The standard length of this tray is 2500mm and the steel used is as per IS: 2062/1079 and the galvanizing is done as per IS: 2629/4759. There is a wide array of accessories that come along with the ladder. They are as follows:
The perforated cable trays come in two categories namely drilled and perforated. These perforated cable trays come in 50 mm length with a minimum of 25 mm cross section. The perforated category comes in widths ranging from 50 mm to 900 mm. They have the capacity Plastic Plate Bowl for standard support span of 2,500 mm. These perforated cable trays are specially engineered making use of quality HR sheets and pre galvanized sheets with specific thickness and flange heights. Some of its important specifications are given below:
It comes in varied finish such as hot dip galvanized, Red oxide, Enamel painted &
ower coated.
Standard length of the tray is 2500 mm
The Steel used is as per IS: 2062/1079 and the galvanization is as per IS: 2629/4759
VSP Tray. These perforated cable trays come in 50 mm length with a minimum of 25 mm cross section. The perforated category comes in widths ranging from 50 mm to 900 mm. They have the capacity for standard support span of 2,500 mm. These perforated cable trays are specially engineered making use of quality HR sheets and pre galvanized sheets with specific thickness and flange heights.